CBr4 Controller
The CBr4 Controller is designed to control the pressure and the valves of a CBr4 gas injector in an MBE system.
Presentation
The CBr4 Controller has been designed for reliable continuous operation in a production environment as well as being simple and intuitive to use.
The CBr4 Controller incorporates digital and serial hardware which allows control of up to four solenoid valves and a pressure controller. Using a remote computer connection or the front panel, the unit can control the gas flux from a CBr4 gas injector.
The CBr4 Controller consists of a rack mounted controller that powers up to four 24VDC solenoid valves and controls the pressure setpoint of a remote pressure controller via a serial connection.
- 01-0012
CBr4 replacement controller 120V - 01-0013
CBr4 replacement controller 240V
Product Specifications
| Operating Temperature | -25 to 70°C |
| Operating Humidity | 20 ~ 90%; non-condensing |
| AC Input Voltage | 1φ: 176 ~ 264 VAC or 1φ: 88 ~ 132 VAC, selectable |
| AC Input Frequency | 47 ~ 63Hz |
| Fuse | 5 x 20 mm 3.15A 250V – Quick Acting |
| Rack Size | 9.5 in. Half Rack Standard 3U, ~20 in. deep |
| Controller Dimensions | 9.5 x 5.25 x 19.5 in. (24.1 x 133.4 x 49.5 cm) |
| Controller Weight | 11.5 lbs ( 5.2 kg) |
| Serial Communications | RS-232; DTE configuration DB-9 Male |
| Pressure Controller Serial Communications | RS-232; DTE configuration DB-25 Female |
| Solenoid Control Output | 7 Channels – 24VDC @ 1 A |
