Shutter Controller and Solenoids
Mil spec switches.
Individually selectable Open/Close/Remote.
For pneumatic shutters.
Presentation
Our rack mount shutter interface provides 24 Volt AC, DC or relay closure signals to open and close air solenoids for operating shutters. Remote operation of the shutters is by 0-5V digital inputs. Each shutter may be separately placed in remote operation, closed, or open by a front panel mounted toggle switch. Operates on 110-240 VAC. The standard configuration is 24 channels.
- 01-0023
Shutter controller 24 channel – Universal AC - 01-0025
Shutter controller 12 channel – Universal AC - 01-0022
Pneumatic Panel 12 Channel
Product Specifications
| Operating Temperature | 0 to 55°C |
| Operating Humidity | 0-85%; non-condensing |
| Operating Altitude | 5000 ft. (1520 m) |
| AC Input Voltage | 1φ: 85~264V |
| AC Input Frequency | 50 or 60Hz ±5% |
| AC Connector | IEC/EN 60320-1 C14 |
| AC Fuse | 5 x 20mm – 3.15 Amp |
| Rack Size | 2U (full rack) |
| Physical Dimensions | 19 x 14 x 3.5 Inches |
| Digital Input Connector | 50 Pin IDC Header |
| Digital Input Mating Connector | 50 Pin Ribbon Cable Socket (3M 89150-0103) |
| Digital Input Voltage Range | 0 – 5VDC (TTL/CMOS) (see manual for pin-out) |
| Output Connector | DB25 Female |
| Output Signal | See manual |
| 24 VDC Output Current | 1 Amp Maximum |
| 5 VDC Output Current | 1 Amp Maximum |
| 5/24 VDC Connector | Standard Binding Post |
